Field manual

STEP vs IGES: what is the difference?

Choose STEP unless a receiver specifically asks for IGES. STEP is the maintained international standard and carries solids and assemblies; IGES is an older format that was built around curves and surfaces and is mostly kept alive for legacy workflows. Both open in CadRoam on iPhone, iPad and Mac.

Updated:

Procedure

Open. Verify. Inspect.

A short workflow that preserves the original engineering file and makes the format limits visible before you rely on the result.

  1. 1

    Default to STEP

    If the receiving system accepts it, export STEP. It keeps solids and assembly structure that IGES handles less reliably.

  2. 2

    Use IGES for a stated reason

    Export IGES when a legacy tool, a surface-modelling workflow or a customer requirement asks for it.

  3. 3

    Verify the file you made

    Open the exported file in a second application and check bodies, surfaces and bounds before you send it.

Format check
STEPExact B-Rep, curved surfaces, assemblies, AP242
IGESB-Rep and curved surface geometry
ProcessingOn device, no upload
CaveatCoverage varies by exporter and edition
STEP and IGES compared
STEP (.step, .stp)IGES (.iges, .igs)
StandardISO 10303, still maintainedIGES 5.3 (1996) is the last published version
StrengthSolids, assemblies, product dataCurves and surfaces, legacy exchange
Assembly structureSupportedLimited
File encodingPlain textFixed-format text
New workPreferredOnly when requested

How the two formats differ

IGES, the Initial Graphics Exchange Specification, dates from the early 1980s and was designed to move drawings and surface geometry between CAD systems. STEP was created later to describe complete product data, and its first parts were published in 1994.

After that, interest in extending IGES faded and version 5.3 from 1996 is generally cited as the final release. STEP, by contrast, kept growing through application protocols such as AP203, AP214 and AP242. The practical effect is that exporters are much better tested for STEP.

Where IGES still shows up

You will still receive IGES from older shops, from some surface-heavy workflows such as aerospace or automotive styling, and from machines and CAM tools set up years ago. A surface model may transfer well in IGES and then fail to close into a solid because gaps appear at the joins.

That is the most common IGES complaint: the file opens, but the faces are loose surfaces, not a watertight body. If you need a solid, ask for STEP.

Choosing for a given job

Sending a part to a CNC shop, a supplier or a client: STEP. Sending an assembly: STEP. Handing a surface model to a tool that only reads IGES: IGES, and ask the receiver to confirm it opens cleanly. Sharing for 3D printing: neither, use a mesh; see STEP vs STL.

If you are not sure, send both. They are small compared with the cost of a round trip.

Opening STEP and IGES on iPhone, iPad and Mac

Neither macOS nor iOS previews STEP or IGES. CadRoam reads both from Files or Finder without an account or upload, so a buyer or inspector can check what arrived. Orbit, pan and zoom, browse objects, hide and isolate parts, and read bounds and mesh statistics where the geometry provides them.

Coverage depends on the schema edition and exporter in both formats. An unusual export can render partially, so read any warnings the app shows and compare against the source CAD system. For the walkthrough, see our guide to opening an IGES file on iPhone, iPad and Mac.

Primary sources

Questions

Before you rely on the view.

Is IGES obsolete?

It is no longer developed, with version 5.3 from 1996 the last published release, but it is still read and written by many systems. STEP is preferred for new work.

Which format keeps assemblies?

STEP. It can store assembly structure and part names; IGES handles this far less reliably.

Why did my IGES export come out as loose surfaces?

IGES often carries surfaces that do not close into a solid. Export STEP if the receiver needs a watertight body.

Can CadRoam open both?

Yes. It opens STEP, STP, IGES and IGS on iPhone, iPad and Mac, parsed locally.