Field manual

STL vs OBJ vs 3MF: which mesh format?

Use STL for plain geometry that any printer software accepts, OBJ when you need named objects or materials, and 3MF when a modern slicer or workflow supports it. All three describe a surface as triangles or polygons, but they differ in what else they store. CadRoam opens all three on iPhone, iPad and Mac.

Updated:

Procedure

Open. Verify. Inspect.

A short workflow that preserves the original engineering file and makes the format limits visible before you rely on the result.

  1. 1

    Decide what the file must carry

    Shape only: STL. Several named parts or a colour: OBJ or 3MF. Units, colours and print settings in one package: 3MF.

  2. 2

    Check the receiving software

    Older tools often read only STL. If you are not sure, ask or send STL and the richer format side by side.

  3. 3

    Look at the exported file

    Open it before sharing. Confirm part count, orientation and overall size, as meshes do not always declare units.

Format check
STLBinary and ASCII
OBJIndexed geometry, objects, groups, materials
3MFCore mesh geometry; extensions reported
Also opensPLY, glTF, GLB, USDZ
STL, OBJ and 3MF compared
STLOBJ3MF
GeometryTrianglesPolygons, often indexedTriangle mesh in a package
Multiple objectsNoYes (objects and groups)Yes
Materials and colourNoYes, via a material libraryYes
UnitsNoNot declaredDeclared
ContainerSingle fileText, often with a material fileZipped package

STL: the lowest common denominator

STL stores triangles and nothing else. That makes it accepted by almost every slicer and viewer and also makes it blind to colour, material, units and part names. If you export one to millimetres and the receiver reads inches, nothing in the file corrects it. Our STEP vs STL article explains the other side of the trade, exact geometry.

OBJ: shape with objects and materials

OBJ is a text format that lists vertices and the faces that use them. It can define named objects and groups and point to a separate material file, so a model with several parts can stay organised. It is a common export from modelling and scanning tools.

Files are indexed, meaning vertices are shared between faces, so a clean OBJ is smaller than the same mesh as a triangle soup. Units are not declared, so you still need to agree on scale with the receiver.

3MF: a package built for printing

3MF is a zipped package. Its core is a mesh, but it also carries units and can hold multiple objects and colour in one file. Many slicers accept it for that reason. It also allows extensions, and a viewer may not support every one.

CadRoam processes core 3MF mesh geometry locally and reports an unsupported extension explicitly with a suggestion to export a basic 3MF, STL or OBJ.

Opening them on Apple devices

None of the three has a built-in viewer with orbit, part isolation and statistics on iPhone or iPad. In CadRoam you import from Files, orbit and zoom, browse objects, hide and isolate parts, and use wireframe, transparency and bounding box. Triangle counts and bounds are shown where the geometry provides them.

Everything is processed on the device with no account and no upload, so a prototype stays private. CadRoam also opens PLY, glTF and USDZ. See our STL viewer guide for iPhone and iPad for a walkthrough.

Primary sources

Questions

Before you rely on the view.

Is 3MF better than STL?

For carrying units, colour and multiple objects, yes. For compatibility with older tools, STL is still the safest.

Does OBJ store colour?

Through a separate material library file it can. The mesh itself is just vertices and faces.

Which one is smallest?

It depends on the model. Indexed OBJ shares vertices between faces; 3MF compresses inside its package; binary STL repeats vertices for every triangle.

Can I view them on an iPhone?

Yes. CadRoam opens STL, OBJ and 3MF on iPhone, iPad and Mac, locally.